Dicing Die Bonding Tape

RAD-9100 (Video Clips)

Product Information

Die to Substrate
Type : Cure - Cureless

  • Adhesive Thickness
    10μm ~ 30μm

Die to Die
Type : Cure - Cureless

  • Adhesive Thickness
    5μm ~ 25μm

Die to Die FLOW
Type : Cure

  • Adhesive Thickness
    60μm ~ 75μm

Adwill LE Tape is a high value-added tape that combines the functions of dicing tape and die bonding material. Prevents adhesive bleeding or unevenness by transferring the adhesive uniformly onto the backside of the die at pick-up. Particularly suited for die bonding of thick stacked CSPs. Processing is also simplified since the same tape can be used in the process from dicing to bonding.

  1. During dicing, the tape secures wafers in a manner similar to regular dicing tape. It is a multi-functional tape that transfers an adhesive layer to the backside when a die is picked up.
  2. Because the DAF lamination process can be omitted, processing is simplified, while damage to the wafer caused by heat treatment during adhesion is eliminated as well.
  3. Because heat curing (wafer mounting) can be done at low temperatures, the probability for damage to the wafer from heating is reduced.
  4. There are no problems such as adhesive bleeding or die tilt.
  5. Three lineups are available for following applications: one for die to die, one for die to substrate which conforms well to the bumps and depressions, and one for die to die FOW.*
    *FOW: Film On Wire
Process Flow
LE Tape Method vs Paste Type Adhesive Method
Subject LE Tape Paste type Adhesive
Adhesive Condition Uniform over whole surface Non-uniform, partial coverage
Effect on Die Size No Yes
Tool and Adhesive Layer Control None required Required
Bleeding of Adhesive During Curing No Yes
LE Tape for Die to Substrate Application
  1. With this tape, bumps on the substrate can be fully covered thanks to control of the adhesive material's elastic modulus. Similar to conventional paste type adhesives, it reduces the risk of damage to a package from residual air voids.
  2. Adwill LE Tape uses an adhesive agent for outstanding adhesion to substrate materials.
LE Tape for Die to Die Application
  1. Adhesive thickness is in uniform and no adhesive bleeds out the edge making bonding at die size level possible.
  2. Maintains proper elasticity modulus and enables excellent wire bonding after die bonding.
LE Tape for Die to Die FOW Application

Die to Die FOW Application used

  1. With thicker adhesive layer and the control of the elastic modulus under a heating environment during die bonding, the wire underneath normally 50 to 60 µm in height, is embedded in the adhesive layer during lamination.
  2. Allows stabilized stacks of the same size as the wire is securely embedded and sealed in the adhesive layer, eliminating damage to the wire itself as well as contact with the bottom surface of the upper layer die.
  3. Without the need for a spacer to maintain wire height between dies, the tape makes thin packaging possible and improves production efficiency.

RAD-9100 (Video Clips)

LE Tape for DBG Process (Video Clips)

Adwill LD Tape is dicing die bonding tape for the DBG (Dicing Before Grinding) process. When applying dicing die bonding tape to separated dies in the DBG process, a process to cut the adhesive layer between the dies is required. High quality adhesive layer cutting of "LD Tape" is achieved by using full cut laser dicing.

  1. Easy pick-up allows it to be effective for ultra-thin dies.
  2. Full cut laser dicing of adhesive layers is enabled by optimizing the suitability for laser cutting.
  3. Available in adhesive thickness of 5µm and 7µm, enabling high density and multi-stacked packages.

ISO 9001 : 2008
Certificate JP08/060975
Lintec Corporation
Agatsuma Plant
Technology Administration
R&D Div. Research Laboratory
Planning Dept.
Business Administration Div.
Advanced Materials Operations.

ISO 9001 : 2008
Certificate JQA-QM7787
Lintec Corporation
Ina Technology Center

ISO 14001 : 2004
Certificate JP08/070484
Lintec Corporation
(Includes Agatsuma Plant, Ina Technology Center, Research Laboratory, and others)

At Lintec's Research Laboratory (Saitama Prefecture) and Agatsuma Plant (Gunma Prefecture), where tapes for semiconductor manufacturing are developed and manufactured, and at the Ina Technology Center (Saitama Prefecture) where related equipment are developed and manufactured, certification has been obtained for the ISO 9001 quality management system and the ISO 14001 environment management system.